Mikromotor-Ausrüstung, hohe Rotation, 90000 U/min, Nail Master, Schmuckpoliermaschine, zwei Handstücke zum Polieren von Holz und Stein, 150 W, FN330

Mikromotor-Ausrüstung, hohe Rotation, 90000 U/min, Nail Master, Schmuckpoliermaschine, zwei Handstücke zum Polieren von Holz und Stein, 150 W, FN330

Packliste:
1. FN330-Controller
2. FN330 bürstenloses Handstück (Standard 2,35 mm Spannfutter)
3. FN330-90K Handstück (optional für 3 Spannfutter unterschiedlicher Größe)
4. 2 Handstückhalter
5. Fußpedal
6. FN330-90K Handstück-Wartungsschlüssel
7. Bedienungsanleitung
8. FN330 bürstenloses Handstück-Wartungsschlüssel
9. Netzkabel (Der europäische Standardstecker wird standardmäßig mitgeliefert)

Der umfassendste Spezialist für Nagelpflege

Modell STRONGdrill FN330
Typ Bürstenlos Steuerbox
Handstück FN330 Handstück (90000 U/min)
Handstück Handstück mit großem Spannfutter (90000 U/min)
Leistung 150 W
Spannung 110 V-50 Hz/220 V-60 Hz
Leerlaufdrehzahl 0-50000 U/min
Steckertyp EU US UK AU
Anwendungsbereich Polieren von Jade und Schmuck

1. Speed control knob
2. Handpiece holdeB
3. No.1 Handpiece jack
4. Rotate speed LED display
5. No. 2 Handpiece jack
6. Handfoot switch
7. No.1/ No.2 handpiece
8. Positive / reverse buttor
9. Positive / reverse buttor
10. switch
Note: When the chuck is replaced (4mm, 5mm, 6mm, 6.35mm), The controller should be adjusted to a safe speedof 35,000 to avoid accidents.

1. Power cord jac
2. Fuse replacement slot
3. Pedal jack Connectionr

A good controller should be equipped with a good handpiece

FN330 Brushless handpiece strongenough

Parameter details

Note: When the chuck is replaced (4mm, 5mm, 6mm, 6.35mm),The controller should be adjusted to a safe speed of 35,000 to avoid accidents.

Foot control switch More convenient to use

Two pedals to choose from

Big pedal
The big pedal can freely control the speed,
Note: the use of a chuck below 3.175mm is suitable for large pedals

Small pedal
Only start and pause can be used (depress to rotate, release to stop)

Old three-hole plug

New 4-hole plug

If you need to purchase the controller or handpiece separately, please confirm whether the sockets are the same

Product display

1. FN330 controller
2. FN330 brushless handpiece (default 2.35mm chuck)
3. FN330-90K handpiece (optional for 3 chucks of different sizes)
4. 2 handpiece holder
5. Foot control pedalO
6. FN330-90K handpiece maintenance wrench
7. Instruction manual8
8. FN330 brushless handpiecemaintenance wrench
9. power cord(The European standard plug is sent by default)
10. FN330-90K handpiece chuck (3 sizes of chucks can be optional)

Big pedal

The big pedal can freely control the speed,
Note: the use of a chuck below 3.175mm is suitable for large pedals

Small pedal

Only start and pause can be used (depress to rotate, release to stop)

Note: It is recommended to use a small pedal when using a chuck larger than 3.175mm

Precautions：

SHOPPING PROBLEMS
A、About size
The size is manually measured. Due to different measurement tools and measurement methods, there will be an error of 2mm.
Please refer to the size chart and evaluation details according to your usual wearing habits and shop by yourself.
B、About color
The product photos are all adjusted and adjusted after shooting and later by professional photographers, so as to be consistent with the actual products as much aspossible.
However, due to the differences in lighting, display color deviation and personal understanding of colors, a small number of real objects may have colordifferences with the photos.
If you cannot accept it, please purchase with caution.
C、Customer service
If we fail to respond to your inquiries in time, it may be due to excessive inquiries or system failures.
D、About after-sales
f your product with quality problem when you receive, pls take photos to us to check, after checking, we will resend your parcel or full refund.(Wrapped photo of the package,
broken photo of the product, a photo of the tracking number on the package-these 3 photos must be sent to us)
Note: The authenticity is guaranteed, the controller is guaranteed for 1 year, the handpiece is not guaranteed (because the handpiece is a consumable part),
the replacement of the handpiece is damaged and only the parts fee will be charged.
E、About maintenance
① When the handpiece is used, the handpiece should not be idling,
and the grinding pin must be installed.
② When installing the grinding head, the rod of the grinding head must be cleaned and cleaned,
and then loaded into the chuck.
③ Don't let water in when you are using the handpiece otherwise the handpiece will be rust.
It must clean the water out and make it dry then continue to use if water go into to handpiece.
④ The use of the foot switch must be turned off the host power,
otherwise it will affect the performance of the host circuit.
⑤ Don’t hit or make it fall down, especially the handpiece.
⑥ It is strictly forbidden to refuel the bearings.
About delivery
1、 When will my order be shipped?
Usually 1-3 working days after payment is confirmed.
2、Which shipping method will the seller use?
Wie lange dauert es, bis ich die Ware erhalte?
Bestellungen unter 100 USD werden per AliExpress Standard Shipping Express verschickt und die Lieferzeit beträgt 25-60 Tage (in den meisten Ländern).
Bestellungen über 100 USD werden per Federal, DHL, UPS, TNT verschickt und die Lieferzeit beträgt 7-20 Tage (in den meisten Ländern).

Hinweis: Wenn in dem Land strenge Zollbestimmungen gelten oder während großer Einkaufsfestivals wie dem 11.11., verzögert sich die Lieferzeit.