Description
Report ItemDescription
LS252D integrated Leeb hardness tester utilizes a D-type impact device to measure the hardness of a wide range of metal materials. Adopts advanced dual coil technology with good repeatability and measurement accuracy. Built-in direction sensor automatically compensates for measurement errors in different impact directions. Interchangeable hardness scales between Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS), Rockwell (HRA/HRB/HRC). The instrument is highly accurate and can be guaranteed to pass the test of the authoritative metrology institute.
Specifications
|
Specification |
Details |
|
Probe |
Impact device D |
|
Hardness Scales |
HL, HV, HB, HS, HRA, HRB, HRC |
|
Measurement Range |
HLD: 170-960; HV: 83-976; HB: 30-651; HRC: 17.6-68.5; HS: 26.4-99.5; HRB: 13.5-100; HRA: 60-85.8 |
|
Resolution |
1 HL |
|
Accuracy |
±12 HL, ±6 HL (typical) |
|
Repeatability |
6 HL |
|
Display |
128 × 64 dot matrix OLED |
|
Power Supply |
Rechargeable lithium battery 3.7V @ 250mAh, full charge supports over 5000 continuous measurements |
|
Size (L × W × H) |
148 × 34 × 24 mm |
|
Weight |
About 68 g |
|
Working Temperature Range |
-10~50℃, 0~85% RH (no condensation) |
|
Storage Temperature Range |
-10~60℃, 0~85% RH (no condensation) |
Features
1. D type impact device for measuring the hardness of various metallic materials.
2. Adopt dual coil technology with good repeatability and measurement accuracy.
3. Built-in direction sensor automatically compensates for measurement errors in different impact directions.
4. Integrated design, flexible to adapt to various measurement occasions.
5. With accuracy up to ±6HL, it is guaranteed to pass inspection by authoritative metrology institutions.
6. Interchangeable hardness scales between HL, HV, HB, HS, HRA, HRB, HRC.
7. USB interface can be connected to the power supply direct charging, convenient and quick.
8. Built-in 10 metal materials, including steel, alloy tool steel, stainless steel, gray cast iron, etc.
D-type impact device
D type impact device for measuring the hardness of various metallic materials.
Capable of measuring wide range of metal materials
Built-in 10 metal materials including steel, alloy tool steel, stainless steel and gray cast iron wide range of applications and industries.
Integrated design
Integrated design, flexible to adapt to various measurement occasions.
Built-in direction sensor
Built-in direction sensor automatically compensates for measurement errors in different.
Conversions to different hardness scales
Interchangeable hardness scales between Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS), Rockwell (HRA/HRB/HRC).
Pass inspection by authoritative metrology institutions
With accuracy up to ±6HL, it is guaranteed to pass inspection by authoritative metrology institutions.
Use rechargeable lithium battery
USB interface can be connected to the power supply direct charging, convenient and quick.
1. Leeb Hardness Tester*1
2. Nylon Brush*1
3. Small support ring*1
4. USB Data Cable*1
5. User Manual*1
6. Certificate / Warranty card*1
Note
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
Please allow 1-2cm measuring deviation due to manual measurement.
