MAXY FILL Body Filler Hyaluronsyra 70ml 70cc 24MG

MAXY FYLL

HA Filler för kropp
60mL

‌

Vad är Maxy Fill Body Filler?

Maxy Fill är ett kroppsfyllmedel som används för att skapa volym i bröst och rumpa, och dessutom en naturligt utseende profil. Maxy Fill Body Filler ‌innehåller uppgraderad hyaluronsyratvärbindningsteknik. HA kommer från icke-animaliskt ursprung, vilket minskar risken för allergiska reaktioner. Tre egenskaper som gör Maxy Fill Body Filler unik är dess starka viskositet och sammanhållning, Maxy Fill Body Fillers optimala gelhårdhet som enkelt kan kontrolleras och dess enkla modellering. 

‌

Egenskaper hos MaxyFill Body Filler

Maxy Fill Body Filler fungerar på korrigering av bröstens form och volym, det hjälper till med korrigering av asymmetri i ben och skinkor. Och bidrar till att fylla på och anpassa mjuka vävnader efter volymetrisk fettsugning. Maxy Fill Body Filler kan även användas i bröstet, höfterna och andra nedsänkta områden på kroppen. Denna produkt ska administreras via subkutan eller intradermal injektion. Dessutom används den för intim konturplast. Effekten av MaxyFill Body Filler kan vara upp till 8 – 12 månader. MaxyFill Body Filler kan enkelt tas bort med hyaluronidas.

Hur man använder MaxyFill Body Filler

‌
‌General Instructions for Filler Injection Procedure
In the beginning, it is important to examine the area in which to proceed with the treatment from the back and sides to determine the specific injection area. This must be done while the patient is standing, as lying down augments the natural gravity and shape. Before disinfecting, it is useful to mark the specific areas.

The procedure can be performed under local anesthesia and lidocaine injection Usually, for the purpose of volumizing, the filler is injected into the upper gluteal region, which lifts up the gluteal area and the sub-gluteal crease. In case the lateral area lacks volume, the filler could be injected to enhance the dips. For this procedure specifically, it is often used the fanning injection technique.

Experts recommend an injection of 30-40 cc of hyaluronic acid gel for each buttock and no more than 100cc per session, especially if it is the patient’s first time. After the treatment, the doctor should evaluate the product distribution and gently massage it from bottom to top if necessary.

Aftercare
Disinfectant should be applied to the injected points after the procedure. In order to facilitate the product's integration with the dermis, the area must be taped in a triangle shape and the patients are to keep it on for at least three days and avoid getting it wet. Immediately after the treatment, patients may experience slight swelling.

Common Filler Injection Techniques

‌
1. Bolus technique
After passing the needle through the skin to a deeper structure, we inject the product with the needle remaining as still as possible.

2. Serial puncture
It is usually performed very superficially in the intradermal depth. It involves multiple small boluses in a crease or static line. The amount of HA injected is minimal, typically 0.01 to 0.02 ml.

3. Linear threading
In order to enter the skin, the needle is kept parallel to the surface. Backward withdrawal of the needle injects the product. This is called a retrograde linear thread. It is possible to inject the product before the needle in some cases. This can be useful because it can push blood vessels out of the way. In this scenario, we call it an anterograde linear thread, and you can see the product is injected ahead of the advancing needle.

4. Fanning
This technique spreads the product over a wider area. After the needle has passed under the skin, the product is laid down in a linear thread as the needle is withdrawn. However, instead of removing the needle completely, it is necessary to change the angle of the needle and then place another linear thread of product back at the entrance. It is possible to repeat these threads in a radial pattern.

5. Cross hatching
In the cross-hatching technique, the procedure starts by injecting a series of linear threads in a parallel orientation. Then it is necessary to change the angle of the needle to 90 degrees from the original, then inject another series of linear threads, which are all perpendicular to the first row.

‌Why is Maxy Fill Body Filler recommended?

MaxyFill Body FIller is an easily removable product with long-lasting effects. The clients should absolutely consider this body filler if they want to obtain satisfying body contouring and if they want their product to work on soft tissues.