Açıklama
Ürünü rapor et
Introduction
SP950 is a syringe pump for medical use, and it adopts microcomputer system and microelectronic technology, features in high-intelligence and high-safety. LCD can display each parameter in real-time, with multi-function alarm, and alarm with visual, auditory and character prompt. It takes the advantages of easy operation, steady work, high accuracy and checking the syringe specification automatically. And now, it has been widely applied in each vein injection in hospitals for clinical nursing, such as ICU,CCU, neonatology, obstetrics and gynecology, pediatrics, internal medicine, surgery, operating room, emergency room.
Features
1) Infusion rate and total volume can be set by user.
2) Alarms for infusion pipe occlusion, syringe fall-off, communication abnormal, low battery.
3) Bright, alarm volume and range of pressure alarm are adjustable.
4) Quick feed function, convenient for supplying medicine quickly and instantaneously.
5) Enter KVO mode after infusion completed.
6) The system will give prompt signal when there is no operation at power-on state.
7) Built-in rechargeable battery provides such functions as auto-switch power supply and auto-charge.
8) Display parameters with large screen, and give prompt information with visual, auditory and character signal, which is convenient for medical persons to operate.
9) The device can equipped with disposable syringe (CNS), and accuracy can be ensured by adjusting parameters.
Performance
1) Specification requirement for syringe: 10ml/20ml/30ml/50ml (CNS)
2) Infusion rate:
10ml 0.1ml/h-100ml/h
20ml 0.1ml/h-200ml/h
30ml 0.1ml/h-300ml/h
50ml 0.1ml/h-500ml/h
3) Rate of quick feed:
10ml 100ml/h
20ml 200ml/h
30ml 300ml/h
50ml 500ml/h
4) Accumulated volume display: 0ml-999.9ml
5) Accuracy: ±3%
6) Pressure range for occlusion alarm:
Three grades are adjustable:
Low: 40KPa ± 16KPa
Middle: 70KPa ± 30KPa
High: 100KPa± 35KPa
7) KVO rate: 0.1ml/h~5ml/h, adjustable
8) Güvenlik sınıflandırması: Sınıf Ⅱ ekipman, dahili güçle çalışan tip BF
9) Alarm fonksiyonu: 1 Çalışmayan durumda 2 Neredeyse boş 3 Boş, KVO moduna gir 4 Şırınga düşmesi 5 Tıkanma 6 Basınç arızası 7 Motor arızası 8 Düşük pil 9 İletişim anormal
10) Maksimum güç tüketimi: 20VA ~ 30VA, cihaz tam şarj olduktan sonra 5 ml / saat veya 500 ml / saat enjeksiyon hızıyla en az iki saat boyunca sürekli çalışabilir.
11) Güç kaynağı: AC100 ~ 240 V 50 / 60 Hz
12) Pil: şarj edilebilir lityum pil, 7,4 V, 3500 mAh
13) Çalışma ortamı: Sıcaklık: + 5 ~ 40 ℃; Atmosfer basıncı: 860 hPa ~ 1060 h; Bağıl nem : % 20 ~ % 90; güçlü titreşim ve aşındırıcı gaz yok.
14) Depolama ortamı: Sıcaklık: -20℃~+55℃; Bağıl nem: ≤%90, yoğuşma yok; Aşındırıcı gaz yok ve iyi havalandırılmış
Aksesuarlar
Braket
Güç kablosu
Kullanım kılavuzu
İki sigorta
Ülkenize göre ilgili güç fişini ve voltajı göndereceğiz.
Fiziksel özellik
Boyut: 310mm*140mm*135mm(U×G×Y)
Ağırlık: 1,7kg
