Lescolton Laser Picosecond Pen Tattoo Mol Wrat Sproet Melanine Verwijdering Machine Littekens Dode Huid Remover Laser Pen Schoonheid Apparaten

LescoltonSKU: 1902272359

Prijs:
Verkoopprijs$79.00 Normale prijs$110.00
Voorraad:
Uitverkocht
Wordt verzonden naar

60 dagen kopersbescherming
Geldteruggarantie
TERUGSTUURBELEID
15 dagen gemakkelijk retourneren
Beveiliging gegarandeerd

Beschrijving

Rapporteer item
 


 


Kenmerken van de Picosecond Pen

1. Onschadelijk voor de normale huid.

2. Er kan gekozen worden uit 9 sterkte versnellingen en 4 versnellingen.

3. Wordt automatisch uitgeschakeld als er gedurende 5 minuten geen bewerking plaatsvindt.

4. Druk zowel op de schakelaar als op de positioneringsknop om te werken.

5. Eenvoudig te bedienen. Touchscreen.

6. Ergonomisch ontwerp is comfortabel en antislip

7. Korte pulsbreedte, produceert nauwelijks licht- en warmte-effect.

8. Krachtige en snelle energie breekt donker pigment direct af.

9. Zonder schade aan het huidweefsel.

10. Minder behandeltijden, beter behandelresultaat.

11. Breed toepassingsgebied voor klanten, duurzamer en veiliger.

12. Kan melanine effectief omzetten in fijne deeltjes, om zo het metabolisme van de huid te bevorderen en melanineafzettingen te verminderen.


Specificatie:

Artikeltype: Picoseconde Pen
Materiaal: Metaal + ABS
Kleur: Zwart
Wij sturen de bijbehorende stekker en spanning volgens uw land.
Ingang: AC100-220V, 50/60Hz
Vermogen: <8W
Uitgang: DC5V 2A
Golflengte: 440-460nm
Gewicht: 140g
Grootte: 21*4.5*3.8cm/8.27*1.77*1.5in


 

Picoseconde penfuncties

Verwijderaar van tatoeages, moedervlekken, donkere vlekken/sproeten/pigmentvlekken, wenkbrauwen, acne en ga zo maar door.


Product inclusief

1x Picosecond Pen
1x Pen Bag
1x Protective Glasses
1x Adapter
1x USB
1x User Manual
1x Box

Note: The appearance of the adapter may be different due to different batches, but all can be used normally.


How to use?

1. Wear the glasses.
2. Connect the power.
3. Press the switch for 2s to start.
4. Choose the strength and speed.
5. Press the positioning button to positioning.
6. Press both the switch and the positioning button to work.

Methods for removing the tattoo:

1. Apply anesthetic cream.
2. When removing tattoos, use 2-5 for POWER and 3-4 for Speed.
3. The machine head is in contact with the skin and the position is fixed, and the hand is moved slowly to operate. It can be hit repeatedly, but do not stay in the same place for more than 3 seconds.
4. Just hit the tattoo until it turns black, yellow, or reddish (it’s fine if you have one of the symptoms, don’t hit it hard, otherwise it will blisters. Scabs will form in a few days, and the effect will be seen after the scab drop ).
5. After 2 hours, apply the repair solution and wait for 1-3 days. After the scab is formed, apply the repair solution once a day.
Tips: After each operation, you just can operate in the same place after recover(About 15-30days)

Note:
1. For first use, it is recommended to start from the first gear. If it can't be beaten, adjust the high gear.
2. It can only be removed in a small area (each time the diameter should not exceed 5cm). For larger tattoos, you needs to be operated multiple times, otherwise it will cause inflammation and suppuration. If there are blisters, the gear is too high and you need to wait for the blisters to disappear before performing the second operation

Methods for removing spots and moles:

1. When removing spots and moles, use 2-3 gears for POWER and 3-4 gears for speed, and then adjust according to personal tolerance.
2. To remove spots and moles on the face, practice on the body first, and then operate the face after the recovery is good and satisfactory.
Tips: Other operations are the same as removing tattoos.

Note:

1. Wear the glasses when you use.
2. When you use the device for the first time, it is suggested that you practice on some colorful paper or fruit.
3. When you use the device for the first time, you must start from the lowest level, and then gradually increase the level based on your own situations.


Notes:

1. Het product heeft geen ingebouwde batterij en moet worden aangesloten wanneer het wordt gebruikt. Sluit de voeding aan wanneer het wordt gebruikt.
2. Ons apparaat met Two-Button Activated Protection. Als u alleen op de positioneringsknop drukt, wordt de laser niet daadwerkelijk geactiveerd door alleen de positionering. Wanneer het wordt gebruikt, moet u zowel op de schakelaar als op de positioneringsknop drukken om te werken. Houd beide knoppen ingedrukt om de laser te activeren.
3. De energie zal het grootst zijn wanneer het apparaat zich dicht bij uw huid bevindt, omdat de energiefocus is gebaseerd op het sluiten van uw huid.


Contra-indicatie:

1. Kinderen en ouderen.
2. Personen met een lichtgevoelige huid en personen die lichtgevoelige medicijnen gebruiken.
3. Gebruikers van geïmplanteerde medische elektronische apparaten en levensondersteunende systemen.
4. Zorg voor een goede ventilatie in de ruimte.
5. Gebruik het apparaat op een plek die ver weg is van kinderen.


You may also like

Recently viewed