Description
Report Item
Main Features
* Ultrasonic vibration, high-speed vibration, easy cutting
* The output power can be as high as 30W, and various materials can be easily cut. For example: cardboard, wooden boards, acrylic boards, carbon fiber boards, plastic tubes, figures, leather, etc.
* Vibrates 40,000 times per second, strong kinetic energy output, smooth cutting
* 120g small and portable, easy to carry
* Replaceable blade with nearly 23° peak tip and two adjustable gears to meet different cutting needs
* TYPE-C power supply, can also be powered by a power bank
Detailed parameters
Ultrasonic cutting knife
*Ultrasonic cutting knife needs to be plugged in to use
Output power up to 30W
A variety of materials can be easily cut, such as cardboard, wood boards, acrylic boards, carbon fiber boards, plastic tubes, figures, leather, hand-carved, etc. But it does not support cutting metal.
Support Type-C interface power supply
Traditional ultrasonic cutting knives are usually powered directly from the socket, while our ultrasonic cutting knives are powered by TYPE-C, support PD/QC protocol, and can be powered by a mobile power bank.
*Supports 12V output power adapter or power bank for power supply. The power of the power adapter or power bank is required to be greater than 30W. Otherwise, the device may be overloaded during the cutting process and cause it to stop working.
40,000 times per second (40KHZ) high-frequency vibration
Powerful kinetic energy output, smooth cutting, precise control of cutting depth and range.
High-speed vibration, easy cutting
Precise control of cutting depth and range can improve cutting accuracy and be more consistent with the cutting of paper models and small parts.
No hand fatigue for long-term use, 120g lightweight body
Compact, does not take up space, easy to carry
Two gears are adjustable to meet different cutting needs
Indicator light status description:
If only PD/QC supports 12V, the indicator light flashes blue-green and then turns to white standby;
If only PD/QC supports 15V, the indicator light flashes yellow and then turns to white standby;
If the PD/QC supports 12V and 15V, the indicator light flashes green and then turns to white for standby;
If the protocol is not supported, the indicator light will turn red.
More details
Switch button: Switch button design is more convenient;
Double cover design: double protection of the blade, safer to carry;
Automatically stops in five minutes: you can leave the cutting process with confidence;
Outdoor use: It can be powered by a power bank and can be easily used outdoors.
Blade replacement steps
1. Criteria for blade replacement: Visually inspect the blade edge if it is chipped or deformed, or the cutting is more laborious and the cutting effect is not as good as before.
2. Before replacing the blade, be sure to confirm that the power supply has been cut off. The quickest way is to unplug the power cord and the replacement work can only begin after the indicator light goes out.
3. If you need to replace the blade during the cutting process, please wait for the blade and ultrasonic vibrator to cool down and cut off the power supply before replacing to avoid burns.
4. Use a hexagonal wrench to remove the fastening screw in the direction of rotation as shown in the figure, and take out the old blade. Please be careful not to scratch your fingers during the operation.
5 Insert the new blade into the slot of the blade fixing block. Note that the blade must be inserted into the bottom of the slot. Also, pay attention to the direction of the cutting edge of the blade. Please refer to the illustration for the cutting edge direction. Follow the illustration.
Tighten the fastening screw in the direction of rotation, and the tightening torque is approximately 50cN·m. If the blade fixing screw is loose, the blade may fly out and cause injury. And it may cause poor cutting effect, malfunction, etc.
